From: Steven Lawson <SLawson@alphamicro.com>
Subject: Aero and Win95

Here is the floppy procedure I received from my Compaq service contact.  He says
the web page is missing some steps.  BTW - I have a 01XXX series drive but have
not noticed whatever problems he's talking about.

>Flash Upgrade the firmware to 071995 or later.
>
>Remove any "Standard Floppy Controller" from Device Manager. The only 
>driver that should be listed is "Compaq PCMCIA Floppy Controller"
>
>Hilight "Compaq PCMCIA Floppy Controller" and press the Properties button. 
>Then select the Resources tab, and press Set Configuration Manually. Press 
>Change Settings. Press OK on the error message that appears. Make sure that 
>Use Automatic Settings is NOT marked. Press OK on the Resource tab window. 
>The configuration for the floppy controller in Device Manager should now 
>be:
>
>	I/O range: 03F0 - 03F5
>	I/O range: 03F7 - 03F7
>	Int. Req: 06
>
>Install the latest Compaq Portable Supplemental Programs for Windows 95.
>
>Install the patch in SP1350 (Only necessary with the 01XXX floppy drive).
>
>If it STILL fails, check that the floppy drive works at all (in DOS). Also, 
>check the number in the upper right corner on the label at the back of the 
>drive. If the number is 01XXX, it is recognized as a Canon drive, and may 
>cause problems. Check with your dealer if you can try a drive marked 02XXX. 
>This is recognized as a Compaq drive.